
Copying a Video Tape
Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.
(Back of TV)
(Back of another source) | (Back of Recording DVD/VCR*) |
or
DVD/VCR | VCR |
|
| DVD |
| DVD/VCR | VCR |
AUDIO OUT | AUDIO IN |
|
|
| |||
AUDIO OUT | DIGITAL | AUDIO OUT |
| ||||
L | L | 1 | AUDIO OUT | OUTOUT | VIDEO OUTY | L |
|
R | R | Connect | L |
|
| AUDIO IN | |
|
|
|
|
|
|
| |
VIDEO OUT | VIDEO IN |
|
|
| CB | R |
|
COAXIAL |
|
|
|
| |||
VIDEO OUT | R |
| VIDEO OUT | VIDEO IN |
CR
Audio/Video cables
(not supplied)
2
RF cable
(supplied)
*Front input jacks are also available
VCR Functions
1)Insert a
2)Insert a tape with its record tab into the recording unit.
3)Hit [SPEED] on the remote control of the recording unit to select the desired recording speed (SP/SLP).
4)Select the “L1”or “L2” position on the recording unit.
•To use the input jacks on the back of this unit, select “L1” position by pressing [0], [0], [1] on the remote control or [CHANNEL K/L].
•To use the input jacks on the front of this unit, select “L2” position by pressing [0], [0], [2] on the remote control or [CHANNEL K/L].
5)Hit [RECORD] on the recording unit.
6)Begin playback of the tape in another source.
7)To stop recording, hit [STOP/EJECT CA] on the recording unit, then stop playback of the tape in another source.
Hint
•For best results during dubbing, use the front panel controls whenever possible. The remote control might affect another source’s operation.
•Always use
•You can use a video disc player, satellite receiver or other audio/video component with A/V outputs.
•“L1” or “L2” is found before the lowest memorized channel. (Example: CH02)
•“L2” input jacks are on the front of this unit.
– 14 – | EN |