FUNAI ZC350MS8 owner manual Timer Recording, Use K / L to select a recording mode, Then press B

TIMER RECORDING

4

Use [K / L / s / B] or [the Number							6
buttons] to enter the start and end
	then press [B].
time,
		NewStartProgram
	Date				End
	JAN/02	12	: 00AM		- - : - -
	CH	Mode
	DTV125. 1		SP
				SP	2	: 00
						1/1

Use [K / L] to select a recording mode.

Date	New Program		End
	Start
JAN/02	12 : 00AM	1 : 00AM
CH	Mode
DTV125. 1	SP	SP	1 : 00

1/1

Refer to “Recording Mode” on page 31.

5Use [K / L / s / B] to select analog (“- - -”) / digital (“DTV”) mode or external input (E1 / E2), then press

[B].
e.g.) external input mode
		Date	New Program	End
			Start
	JAN/02		12 : 00AM	1 : 00AM
		CH	Mode
	E1		SP

SP 1 : 00

1/1

To record from external input (e.g., cable/ satellite box), select E1 or E2.

Use [K / L] to select the channel number to record.

For digital mode, select both major and minor channels. Refer to “How to select a channel number for the timer recording” on page 37 for more details.

e.g.) analog mode

	Date				New Program		End
					Start
	JAN/02				12 : 00AM	1 : 00AM
		CH			Mode
		10			SP	SP	1 : 00
							1/1
e.g.) digital mode
	Date				New Program		End
					Start
	JAN/02				12 : 00AM	1 : 00AM
		CH			Mode
	DTV		125	. 1	SP	SP	1 : 00
							1/1

•You can check the remaining recordable space of the disc when you select the recording mode.

Date	Start		End
JAN/02	12 : 00AM	1 : 00AM
CH	Mode
DTV125. 1	SP	SP	1 : 00

Auto recording mode select...

When “Auto” is selected as a recording mode, the unit calculates how much time is available on the disc and determines the appropriate recording mode to complete recording the program.

Date	New Program	End
	Start
JAN/02	12 : 00AM	1 : 00AM
CH	Mode
DTV125. 1	Auto

Auto 0 : 00

1/1

•“Auto” is only available for one program in the timer program list.

•The recording may be cut short when the available recording space of the disc is too limited.

7Press [OK] when all items areentered.Your program setting will be stored.

•To set another program, repeat steps 2 to 7.

•To exit, press [TIMER] or [SETUP].

•When 2 or more programs are overlapped, “Timer program overlapped” appears, and the overlapped program will be displayed in blue.

•To correct the timer program refer to “Checking, canceling, or correcting the timer programming information” on page 37.

8Press [STANDBY-ONy] to set a timerTIMER REC indicator will light up on the frontprogramming.

panel.

36 EN

E7H51UD.indd 36

2007/02/19 18:23:34