MENU TREE
MN-2
ALARM SETUP See page MN-1.
SEA STATE (
FULL-AUTO,
SEMI-AUTO, MANUAL-CALM,
MANUAL-MODERATE, MANUAL ROUGH)
DEVIATION LEVEL* (
AUTO
, LEVEL)
MANUAL PARAMETERS** (WHEATHER; 1 to 10 ,
RUDDER GAIN; 0.1 to 2.0,
COUNT RUDDER; 0.1 to 4.0)
AUTO TRIM (OFF,
ON
, 1-100,
40
)
AUTO NET TOWING (
OFF
, ON)
SPD CALC. (
SOG
, STW, MANUAL)
RADIUS OF ORBIT (0.05 to 9.99 nm,
0.10 nm
)
SPIRAL SPEED (0.1 to 8.0 kt,
1.0 kt
)
SYSTEM DATA
[MENU] key
AUTO mode menu
NAV mode menu
ALARM SETUP See page MN-1.
NAV SRC (
PORT 1
, PORT 2, BOTH)
SEA STATE (
FULL-AUTO,
SEMI-AUTO, MANUAL-CALM,
MANUAL-MODERATE, MANUAL ROUGH)
DEVIATION LEVEL* (
AUTO
, LEVEL)
MANUAL PARAMETERS** (WHEATHER; 1 to 10 ,
RUDDER GAIN; 0.1 to 2.0,
COUNT RUDDER; 0.1 to 4.0)
AUTO TRIM (OFF,
ON
, 1-100,
40
)
WAYPOINT SWITCHING (
AUTO
, MANUAL)
NAV MODE (
XTE
, COURSE)
FISH MODE (
OFF
, ORBIT TO STBD,
ORBIT TO PORT, FIGURE EIGHT)
SPD CALC. (
SOG
, STW, MANUAL)
RADIUS OF ORBIT (0.05 to 9.99 nm,
0.10 nm
)
SPIRAL SPEED (0.1 to 8.0 kt,
1.0 kt
)
SYSTEM DATA
[MENU] key
MESSAGE (Shows error messages.)
CONTRAST/BRILLIANCE (Contrast: 1 to 16,
10
, Brill: 1 to 8,
8
)
ADVANCED AUTO (
OFF
, ON)
*: Available only when FULL-AUTO is selected at SEA STATE.
**: Default settings are depends on ship's length and width entered on installing.
MESSAGE (Shows error messages.)
CONTRAST/BRILLIANCE (Contrast: 1 to 16,
10
, Brill: 1 to 8,
8
)
*: Available only when FULL-AUTO is selected at SEA STATE.
**: Default settings are depends on ship's length and width entered on installing.