Furuno DWF-200M, DWF-240M INLET HOSE CONNECTION

6

Be careful not to confuse hot water inlet and cold water inlet.

In using only one water tap or in case of attached one water inlet valve, connect the

inlet hose to the cold water inlet valve.

For Screw-Shaped Tap

For Ordinary Tap

INLET HOSE CONNECTION

1Pull down the collar of

the inlet hose to separate

it from the water tap

adapter.

2Loosen the four screws

properly in fitting into

water tap.

3Fit the water tap adapter

into the water tap

and tighten the four

screws evenly while

pushing up the adapter

so that the rubber

packing can attach to the

water tap tightly.

4Remove the tape, and

screw connector B into

connect A tightly.

5Connect the inlet hose to

the water tap adapter by

pulling down the collar of

the hose end.

6Connect the inlet hose

adapter of the hose to

the water inlet of the

washer by turning it

clockwise to be fixed

tightly.

• Please check the rubber

packing inside the inlet hose

adapter of the hose.

1Connect the inlet hose to

the water tap by

screwing the connector

tightly.

2Connect the connector-

inlet supplied if

necessary.

3Insert the inlet hose

adapter into the water

inlet of a washer and turn

it to be fixed.

*Cheek the packing in the inlet

TAPE

.

Connector

Connector

Rubber

Packing

Hose

Connector

Connector

Rubber

Packing

Hose

Connector

inlet

Connector B

Connector A

DWF-200/240M(101) 97.1.19 4:21 PM ˘`6

Contents

Main Model: DWF-200M/240M INSTRUCTION MANUAL = Full-Auto Electric Washing Machine The First Radical Technology and Air Bubble Washing System in the World WATER TAP ADAPTER INLET HOSE PARTS AND FEATURES DRYTEN (OPTION) COVER UNDER (OPTION) HOSE DRAIN (FOR NON-PUMP) HOSE DRAIN CLAMP HOSE DRAIN (FOR PUMP) CONNECTOR INLET(OPTION) ACCESSORIES NOTE WASHER SAFETY Location of washer Drain system INSTALLATION IN STRUCTIONS Pump Model Recommended earthing method Laundry tub drain system Standpipe drain system Non-Pump Model ELECTRICAL REQUIREMENTS For Screw-Shaped Tap For Ordinary Tap INLET HOSE CONNECTION Loading Preparing clothes for washing Sorting OPERATING YOUR WASHER THE FUNCTIONS OF THE CONTROL PANEL FULL AUTOMATIC COURSE WASHING PROCEDURE AND COURSE SELECTION GUIDES FOR OTHER USEFUL PROGRAMS Reserved Washing Partial Selection Among Wash, Rinse or Spin 1Press the Power button GENERAL PROCEDURE FOR OPERATION To winterize washer To use washer again Exterior Interior CARING FOR YOUR WASHER Cleaning your washer Winter storage or moving care Non-use or vacation care HOW TO CLEAN THE FILTER Cleaning the Lint Filter Cleaning the drain filter Cleaning the water inlet filter Stain removal rules REMOVING STAINS PROBLEM CHECK POINT These cases are not malfunctions The sound "wing" heard during water supply is the operating sound made by the water inlet valve. The sound "sha" heard in stopping the tub is the sound that comes from the autobalancer of the tub. TROUBLE SHOOTING Before calling for service, check these SPECIFICATION In case of moving Washing Machine, please follow the following picture.