SAFETY INFORMATION FOR THE INSTALLER
WARNING
Only qualified personnel should work inside the equipment.
This equipment uses high voltage electricity which can shock, burn, or cause death.
Turn off the power at the ship's mains switchboard before beginning the installation. Post a warning sign near the switchboard to ensure that the power will not be applied while the equipment is being installed.
Serious injury or death can result if the power is not turned off, or is applied while the equipment is being installed.
CAUTION
Ground the equipment to prevent electrical shock and mutual interference.
Ungrounded equipment can give off or receive
Confirm that the power supply voltage is compatible with the voltage rating of the equipment.
Connection to the wrong power supply can cause fire or equipment damage. The voltage rating appears on the label at the rear of the equipment.
NOTICE
The mounting location must satisfy the following conditions:
Away from rain and water splash Out of direct sunlight
Away from air conditioner vents
Away from magnets and magnetic fields Moderate and stable in temperature and humidity
iv
