SAFETY INSTRUCTIONS
WARNING
Hazardous voltage.
Can shock, burn or cause serious injury.
Do not work inside the equip- ment unless totally familiar with electrical circuits.
Do not approach the antenna closer than 0.9 m (MPE by FCC) when it is transmitting.
The antenna emits radio waves which can be harmful to the human body.
| RF power density | Distance | Description |
| on antenna aperture |
| required by |
| 100 W/m 2 | 0.11 m | IEC 60945 |
|
|
| |
10 W/m 2 | 0.33 m | IEC 60945 | |
| 2 W/m 2 | 0.9 m | MPE by FCC |
| 100 W/m 2 | 0.11 m | IEC 60945 |
10 W/m 2 | 0.33 m | IEC 60945 | |
| 2 W/m 2 | 0.9 m | MPE by FCC |
(MPE: Minimum Permissible Exposure)
Turn off the power at the mains switch- board before beginning the installation. Post a warning sign near the switch- board to indicate that power should not be applied while the equipment is being installed.
Electrical shock, serious injury or fire can result if the power is not turned off or is applied while the equipment is being installed.
CAUTION
Attach securely protective earth to the ship's body.
The protective earth (grounding) is required to the AC/DC power supply unit to prevent electrical shock.
Confirm that the power supply voltage is compatible with the voltage rating of the equipment.
Connection to the wrong power supply can cause fire or equipment damage. The voltage rating appears on the label at the rear of the display unit.
Observe the compass safe distance to prevent deviation of a magnetic compass.
|
| Standard | Steering |
|
|
| compass | compass |
|
| 1.45 m | 0.90 m |
| |
| 1.45 m | 0.95 m |
| |
|
|
|
|
|
| 0.85 m | 0.55 m |
| |
|
|
|
|
|
| 0.75 m | 0.50 m |
| |
|
|
|
|
|
| 1.50 m | 0.95 m |
| |
|
|
|
|
|
| 0.40 m | 0.30 m |
| |
|
|
|
|
|
| 1.20 m | 0.80 m |
| |
|
| |||
|
|
|
| |
|
|
|
|
|
| 1.50 m | 1.00 m |
| |
|
| |||
|
|
|
| |
| 0.90 m | 0.60 m |
|
i