SAFETY INSTRUCTIONS
Safety Instructions for the Operator | Safety Instructions for the Installer |
WARNING
Do not disassemble or modify the equipment.
Fire, electrical shock or serious injury can result.
Immediately turn off the power at the switchboard if the equipment is emitting smoke or fire.
Continued use of the equipment can cause fire or electrical shock. Contact a FURUNO agent for service.
Make sure no rain or water splash leaks into the equipment.
Fire or electrical shock can result if water leaks in the equipment.
Keep heater away from equipment.
A heater may melt the power cord, which can result in fire or electrical shock.
Do not place
Fire or electrical shock can result.
WARNING
Turn off the power at the switchboard before beginning the installation.
Fire or electrical shock can result if the power is left on.
Do not install the equipment where it may get wet from rain or water splash.
Water in the equipment can result in fire, electrical shock or damage the equipment.
Be sure that the power supply is compatible with the voltage rating of the equipment.
Connection of an incorrect power supply can cause fire or damage the equipment.
CAUTION
Observe the following compass safe distances to prevent interference to a magnetic compass:
Standard | Steering |
compass | compass |
|
|
0.55 m | 0.35 m |
|
|
1
