Furuno PP-505 manual Turning on the Power, Changing the mode, Changing the printing interval

OPERATION

Changing the mode

Press the [MODE] key to change the printing mode from depth graph to log printing alternately.

The printing interval setting is printed whenever the [MODE] key is pressed.

Changing the printing interval

Press the [INTERVAL] key to choose printing interval.

Depth graph: 9 s →	45 s →	90 s → 450 s
Log: 10 s → 30 s →	1 m →	10 m

The latest data of the printing interval is printed.

When the printing interval is changed, the printing interval setting is printed and marked with an asterisk.

Note: You can skip over setting(s) by pressing the key consecutively within one second.

Changing the depth range

Press the [RANGE] key to change the depth range.

When the depth range is changed, the depth is printed and marked with an asterisk.

Range: 5 m → 10 m → 20 m → 40 m → 100 m → 200 m → 400 m→ 800 m

Note1: Depth range automatically changes depending on the depth range on the navigational echo sounder.

Note2: You can skip over setting(s) by pressing the key consecutively within one second.

Feeding the paper/Printing the marker

To feed the paper, press and hold down the [FEED/MARK] key.

Press the [FEED/MARK] key momentarily to print the marker.

1.3Turning on the Power

Flip down the thermal paper cover and turn on the [POWER] switch. The PP-505 then carries out the diagnostic test. After the test has been completed, the printer is ready to print depth data.

Note: “Disconnect” is printed if data from the navigation echo sounder is not being received during printing or the navigation echo sounder is displaying the system menu.

To turn off the power, press the [POWER] switch.

2