v 5.0
MARINE 10” SUBWOOFER
MS-SW10
INSTALLATION GUIDELINES
Ensure the audio system is turned off before making any connections to the amplifier, subwoofer or source unit. Failure to do so could result in permanent damage to the audio system.
When wiring the subwoofer ensure that wires are protected from sharp objects and always use rubber grommets when wiring through panels. Ensure all terminals and connections are protected from grounding and from each other, as failure to do so could result in permanent damage to the audio system.
When connecting the amplifier and subwoofer ensure you connect the positive and negative output wire from the amplifier to the corresponding subwoofer terminals.
»Ensure there is adequate clearance and depth for the subwoofer to be mounted
»Drill the holes for the mounting screws
»Insert the subwoofer and secure with the appropriate screws
SUBWOOFER PARAMETERS
MAX POWER RATING | 400 Watts |
FREQUENCY RESPONSE | 30Hz - 2kHz |
IMPEDANCE | 4 Ohms |
SENSITIVITY | 88 dB |
MOUNTING DEPTH | 115mm |
MOUNTING DIAMETER | 222mm (8 - 3/4”) |
OVERALL DIAMETER | 268mm (10 - 1/2”) |
RECORD YOUR PURCHASE DETAILS HERE:
MODEL NUMBER
DATE OF PURCHASE
AFFIX RECEIPT HERE
WARNING! Audio Systems can produce sound levels over 135dB. Continuous exposure to sound pressure levels over 100dB may cause permanent hearing loss!
www.fusionelectronics.com
PUBLISHED BY FUSION ELECTRONICS LIMITED: © Copyright 2009 by FUSION Electronics Limited. All rights reserved. Specifications and design are subject to change without notice.
YOU CAN HELP PROTECT THE ENVIRONMENT! Please remember to respect the local regulations: Hand in the