008

Guide

Installation Guide

Installation

 

 

 

 

 

 

 

 

 

Grille, Twist

Into Position

Stainless

Screws

Speaker

Mounting

Gasket

Mounting

Surface

1.Check clearance around the mounting area before installation, ensuring the area is free from obstruction, and there is adequate depth for the speaker.

2.Check that the area chosen for mounting the speaker is flat. If the area is curved, it may not be possible to fit the speaker without “twisting” the frame.

3.If the installation area is only slightly curved, use the extra thick closed cell foam gasket provided.

4.Using the supplied mounting template, mark the correct diameter on the mounting surface.

5.Use a suitable cutting tool to remove the marked surface, and drill four holes for the screws to pass through.

(NOTE: Confirm you are happy with badge position relative to mounting holes)

6.Connect the wires before mounting the speaker. Be sure to observe the correct polarity.

7.With the grille removed, mount the speaker using the four stainless steel screws, and the stainless retainer clips supplied. DO NOT over tighten the screws, especially if the mounting area is not flat.

8.Twist the grille into position.

Installation Tips

Any speaker will only perform to its best capabilities, when correctly placed in the listening area. FUSION Engineers recognise that unlike a home or motor vehicle installation, there are an extremely wide range of marine environments where speakers may be placed. FUSION Full Range Marine Speakers are optimised to perform in the widest possible range of mounting locations, but a little thought and care with placement will always be rewarded with better sound.

•High frequencies are directional. Placing the speakers low down in the boat will lose some of this information. (To improve dispersion of the high frequencies, the grille on your FUSION Full Range Speaker has a uniquely designed “phase correction” feature in the centre, for best performance with the grille on.)

•Speakers should be placed to simulate a “sound stage”, by being placed where you are able to hear both speakers in a stereo situation.

•Bass is dependant on the area behind the speaker. Too small an area will restrict bass, too large will compromise bass performance.

•Placing a speaker such that it is very close to an open area (where sound from the back of the loudspeaker has a very short path to compete with sound from the front of the loudspeaker) produces the least bass.

•If possible, try and make the area behind a speaker an enclosure.

Where the speaker is directly exposed to the outside environment, it is best if this is a sealed enclosure. (Especially if the loudspeaker is exposed to “wash down”, as a vent might allow water to collect in the enclosure.)

Where the speaker is not so exposed (an inside cabin for instance), a better bass performance can be had if the enclosure is a ported or vented type. To help you achieve the best possible result see the optimum enclosure design recommendations. These are by volume only, and for the ported option, an optimum vent size/length is given.

009 Installation Tips

10

11

Page 4 Page 6
Page 5
Image 5
Fusionbrands MS-FR602, MS-FR702, MS-FR402 installation manual Installation Guide, Installation Tips
Page 4 Page 6

MS-FR602, MS-FR402, MS-FR702 specifications

Fusionbrands offers an innovative range of kitchen tools designed to make cooking and food preparation more efficient and enjoyable. Among their notable products are the MS-FR702, MS-FR602, and MS-FR402 models, each boasting unique features and technologies tailored to different culinary tasks.

The MS-FR702 is a versatile food steamer that emphasizes health-conscious cooking. It features a two-tier design that allows for simultaneous cooking of different foods, maximizing efficiency. The transparent lid allows users to monitor the cooking process without lifting the cover, which helps retain steam and nutrients. Additionally, the steamer incorporates a smart timer function that ensures precise cooking times, resulting in perfectly cooked vegetables, fish, and more. The MS-FR702 is constructed from BPA-free materials, underscoring Fusionbrands’ commitment to health and safety.

Next up, the MS-FR602 is a cutting-edge food processor designed to streamline meal prep. With a powerful motor and multiple speed settings, this processor can tackle everything from chopping vegetables to kneading dough. One of its standout features is the patented blade design, which ensures even processing and prevents food from getting stuck. The compact design makes it easy to store, while the easy-to-clean detachable components save time after meal preparation. The MS-FR602 operates quietly, making it a perfect addition to any kitchen.

Lastly, the MS-FR402 is a sophisticated digital kitchen scale that caters to the precision needs of home chefs and bakers alike. This scale features a large, easy-to-read LCD display and a tare function, allowing for accurate ingredient measurements. It supports multiple units of weight, including grams, ounces, and pounds, catering to various recipe requirements. The MS-FR402 is designed with a sleek, minimalist aesthetic that complements modern kitchens, while its non-slip surface ensures stability during use.

Together, the MS-FR702, MS-FR602, and MS-FR402 models from Fusionbrands represent a blend of functionality, elegance, and user-friendly design. These products reflect the brand's dedication to enhancing everyday cooking experiences through innovative technology and thoughtful features, making them essential tools for both novice and experienced home cooks. With these kitchen aids, users can elevate their culinary skills while enjoying the process of preparing delicious meals.
Top Page Image Contents