WARNING! BATTERY DOOR WILL NOT CLOSE UNLESS BATTERY IS PRESENT. REMOVAL OF BATTERY WILL RENDER THE SMOKE ALARM INOPERATIVE.

IMPORTANT! READ ALL INSTRUCTIONS BEFORE INSTALLATION AND KEEP THIS MANUAL NEAR THE ALARM FOR FUTURE REFERENCE.

CONTENTS OF THIS MANUAL

1 -- RECOMMENDED LOCATIONS FOR SMOKE ALARMS

2 -- LOCATIONS TO AVOID

3 -- INSTALLATION INSTRUCTIONS

4 -- OPERATION AND TESTING

5 -- NUISANCE ALARMS

6 -- MAINTENANCE

7 -- LIMITATIONS OF SMOKE ALARMS

8 -- GOOD SAFETY HABITS

9 -- NFPA PROTECTION STANDARD 72, SECTION 2-2.1

10 -- SERVICE AND WARRANTY

Do not try to repair the smoke alarm yourself. Refer to the instructions in Section 11 for service.

1. RECOMMENDED LOCATIONS FOR ALARMS

•Locate the first alarm in the immediate area of the bedrooms. Try to protect the exit path as the bedrooms are usually farthest from the exit. If more than one sleeping area exists, locate additional alarms in each sleeping area.

•Locate additional alarms to protect any stairway as stairways act like chimneys for smoke and heat.

•Locate at least one alarm on every floor level.

•Locate an alarm in every bedroom where a smoker sleeps.

•Locate an alarm in every room where electrical appliances are operated (i.e. portable heaters or humidifiers).

•Locate an alarm in every room where someone sleeps with the door closed. The closed door may prevent the alarm from waking the sleeper.

•Smoke, heat, and combustion products rise to the ceiling and spread horizontally. Mounting the smoke alarm on the ceiling in the center of the room places it closest to all points in the room. Ceiling mounting is preferred in ordinary residential con- struction.

•For mobile home installation, select locations carefully to avoid thermal barriers that may form at the ceiling. For more details, see MOBILE HOME INSTALLATION below.

•When mounting an alarm on the ceiling, locate it at a minimum of 4” (10 cm) from the side wall and 2 feet (60.96 cm) from any inside corner (see Diagram A).

•When mounting the alarm on the wall, it is best to use an inside wall with the top edge of the alarm at a minimum of 4” (10 cm) and a maximum of 12” (30.5 cm) below the ceiling, and at least 2 feet (61 cm) from any inside corner (see Diagram A).

•Put smoke alarms at both ends of a bedroom hallway or large room if the hallway or room is more than 30 feet (9.1 m) long.

MOBILE HOME INSTALLATION

Mobile homes built in the past five to seven years have been designed to be energy efficient. Install smoke alarms as recommended above (refer to RECOMMENDED LOCATIONS and Diagram A).

In mobile homes that are not well insulated compared to present standards, extreme heat or cold can be transferred from the outside to the inside through poorly insulated walls and roof. This may create a thermal barrier which can prevent the smoke from reaching an alarm mounted on the ceiling. In such units, install the smoke alarm on an inside wall with the top edge of the alarm at a minimum of 4” (10 cm) and a maxi- mum of 12” (30.5 cm) below the ceiling (see Diagram A).

If you are not sure about the insulation in your mobile home, or if you notice that the outer walls and ceiling are either hot or cold, install the alarm on an inside wall. For minimum protection, install at least one alarm close to the bedrooms. For additional protection, see SINGLE FLOOR PLAN in Diagram B.

WARNING: TEST YOUR SMOKE ALARM OPERATION AFTER R.V. OR MOBILE HOME VEHICLE HAS BEEN IN STORAGE, BEFORE EACH TRIP AND AT LEAST ONCE A WEEK DURING USE.

2. LOCATIONS TO AVOID

Alarms must not be located within 3 feet of the following:

•Supply and return registers used for forced air heating and air conditioning.

•Ceiling fans and other high air flow areas.

•Bathrooms which contain a tub or shower.

Page 1 Page 3
Page 2
Image 2
Fyrnetics PE9 Recommended Locations for Alarms, Locations to Avoid, Contents of this Manual, Mobile Home Installation
Page 1 Page 3

PE9 specifications

The Fyrnetics PE9 is a cutting-edge device designed to meet the demands of modern technology enthusiasts and professionals alike. With a focus on performance, versatility, and innovative features, the PE9 stands out as a formidable choice in its category.

One of the main features of the PE9 is its exceptional processing power, driven by a high-performance multi-core processor. This allows users to seamlessly multi-task, run demanding applications, and enjoy smooth gaming experiences without any lag. Whether for work or leisure, the PE9 is engineered to handle it all.

The device boasts an impressive display that delivers vibrant colors and sharp images. With advanced display technologies, including enhanced resolution and adaptive brightness, users can expect an optimal viewing experience in various lighting conditions. Whether streaming high-definition videos or participating in video calls, the display ensures clarity and comfort.

Connectivity options are abundant with the PE9, featuring the latest Wi-Fi 6 technology that provides ultra-fast internet speeds and improved reliability. Users can connect to multiple devices simultaneously without compromising performance. Additionally, the PE9 includes Bluetooth capabilities, allowing seamless integration with a wide range of peripherals, from headphones to keyboards.

Battery life is a crucial consideration for any portable device, and the PE9 excels in this area. With a robust battery that offers all-day usage, users can rely on the PE9 to get through their tasks without frequent recharging. Moreover, it supports rapid charging technology, ensuring minimal downtime.

In terms of design, the Fyrnetics PE9 combines aesthetics with functionality. Its sleek, modern build is not only visually appealing but also lightweight and durable, making it an excellent companion for on-the-go users. The device is built with high-quality materials, ensuring it withstands the rigors of daily usage.

Security features are also prioritized in the PE9, with biometric authentication options such as fingerprint recognition and facial recognition. This ensures that user data remains safe while providing easy access to the device.

In summary, the Fyrnetics PE9 is a powerhouse of a device, equipped with superior processing capabilities, a stunning display, robust connectivity, long-lasting battery life, and essential security features. Its combination of performance and design makes it an ideal choice for anyone looking to enhance their technological experience. Whether for professional or personal use, the PE9 promises to deliver exceptional results across various applications.
Top Page Image Contents