For Your Safety | Gardena Art 7944 guide

A For Your Safety

Operating the pump	The pump should be operated via a residual current device
	with a residual current rating of ≤ 30 mA (DIN VDE 0100 -702
	and 0100 -738). The pump must be placed on solid, even
	ground. Please ask your electrician for his advice.
Mains power cables	Mains power cables should not have a smaller cross-section
	than a rubber sheathed cable of the designation H05 RNF.
	Extension cables must meet the requirements of DIN VDE 0620.
For Austria	In Austria power cables should correspond to ÖVE-EM 42,
	T 2 (2000)/1979 § 22 according to § 2022.1. According to this
	standard pumps used in swimming pools and ponds should
	only be operated via an isolating transformer. Please contact
	your electrician.
For Switzerland	In Switzerland mobile appliances which are used outdoors,
	must be connected via a residual-current device.
Visual check	Before operating the pump, look to see if there is any damage
	of the pump (esp. regarding power cable and plug). A damaged
	pump must not be used. In case of damage, please have the
	pump checked by our GARDENA Service Centre or by an
	authorised electrician.