Installing or Removing the Fishfinder
1.Connect the wiring harness to the back of the Fishfinder. Make sure the locking ring is fully tightened.
2.Slide the Fishfinder into the pocket (Figure 3). It might be necessary to apply some pressure when inserting the assembly into the pocket to compress the foam rubber pads. When the Fishfinder is fully inserted, the lock tabs click into place (Figure 4).
3.To remove the unit from the pocket, press the lock tabs toward the unit while sliding the unit out of the pocket (Figure 4).
ENTER
MENU
| Lock Tabs |
Figure 3 | Figure 4 |
|