Garmin 1600 4.Fasten the other end of the cable to your computer

4.Fasten the other end of the cable to your computer.

For the parallel connector, squeeze the wire clips together until they lock in place on either side of the connector.

For the serial connector, use a screwdriver to fasten the screws of the connector, if required.

5.Insert the interface cable into the U-shaped part of one cable clip. Lift the left side of the printer up slightly. Then hook the short lip of the clip into the forward slot and push the bottom of the clip under the printer until it clicks in place. Repeat this procedure with the second clip and insert it into the back slot.

By default, the printer is set up to print letter-size paper from the standard paper feeder. If you are printing onto any other size of paper, you need to change the paper tray% paper sire setting. See Chapter 2 in the Reference Guide for more information.

If you are using the serial interface, see ‘Using the serial interface” at the end of step 8.