Garmin 160 ENTER, ENTER, ENTER, ENTER, Flasher, Simulator, To Change the Noise Reject Setting:, To Turn the Graphic Flasher On and Off:

Remember when setting the Noise Reject tool, the higher the noise rejection setting, the more likely the unit is to not show fish or structure.

To Change the Noise Reject Setting:

1.Highlight the ‘Tools’ tab on the Setup Menu.

2.Highlight the ‘Noise Reject’ selection field and press ENTER.

3.Choose ‘Off’, ‘Auto’, ‘Low’, ‘Med’, or ‘High’, and press ENTER.

Flasher

With the ‘Flasher’ tool active, a graphic Flasher representation will be displayed on the far right side of the chart. This graphic Flasher displays structure and bottom returns much the same as a true Flasher. You may find this feature particularly useful when using ‘Fish Symbols’.

To Turn the Graphic Flasher On and Off:

1.Highlight the ‘Tools’ tab on the Setup Menu

2.Highlight the ‘Flasher’ selection field and press ENTER.

3.Select ‘ON’ or ‘OFF’ and press ENTER to accept the selection.

Simulator

The ‘Simulator’ tool allows you to select a transducer type for use with the Fishfinder 160’s built in simulator. These choices allow the simulator to more accurately depict actual operation of the unit. For details on using the simulator see page 33.

Unit Operation

Setup Menu/Tools

Graphic Flasher Selections

Simulator Selections

19