• Wash the strap after every seven uses. The

method of cleaning is determined by the EN symbols printed on the strap.

Machine wash

Hand wash

•Do not put the strap in a dryer.

•To prolong the life of your heart rate monitor, unsnap the module when not in use.

Battery Information

WARNING: Do not use a sharp object to remove user‑replaceable batteries. Contact your local waste disposal department to properly recycle the batteries.

1.Use a small Phillips screwdriver to remove the four screws on the back of the module.

2.Remove the cover

and battery. Wait 30 seconds. Insert the new battery with the positive side facing up.

Note: Be careful not to damage or lose the

O-ring gasket.

3. Replace the back cover and the four screws.

Heart Rate Monitor Instructions

EN–3