Garmin 200 To attach the cradle to the bicycle mount:, To release the cradle:, tip:, Settings, System, Usage Mode, Bicycle

For horizontal bars: Separate and remove the top part of the mount, turn it 90 degrees, and replace. Continue with step 2.

2.Place the wedge on the bicycle stem, and then place the bicycle mount on the wedge. Make sure the release lever is on the left.

3.Thread the two cable ties through the two slots on the bicycle mount. Position the mount on your bicycle and attach using the cable ties.

ReleaseleverCable ties

To attach the cradle to the bicycle mount:

1.Fit the bottom of the nüvi in the cradle, and snap the top of the nüvi into place.

2.Align the cradle with the bicycle mount.

3.Slide the cradle left onto the bicycle mount until it snaps into place.

tip: Change the Usage Mode on your nüvi. Touch > Settings > System > Usage Mode > Bicycle.

To release the cradle:

1.Remove the nüvi from the cradle.2.Press down on the release lever, and slide the cradle to the right.

EN-