Getting Started

WARNING

See the Important Safety and Product Information guide in the product box for product warnings and other important information.

Installing a Memory Card

The device supports microSD™ and microSDHC memory cards.

1Insert a memory card into the slot on the device.

2 Press it in until it clicks.

Connecting the Device to Vehicle Power

Before you can use or turn on the device, you must install a memory card.

You can power and charge the device using vehicle power.

TIP: You should fully charge the device before you use the device on battery power.

1With the vehicle off, plug the power cable into a power outlet in your vehicle.

2Plug the other end of the power cable into the USB port on the device.

3 Press the device onto the suction cup .

ÀÁ

4Press the suction cup to the windshield, and flip the lever

Â

back toward the windshield.

Turning On the Device Manually

Before you turn on the device using battery power, you should fully charge the battery (Connecting the Device to Vehicle Power).

NOTE: When the device is connected to an ignition-switched power outlet, it turns on automatically when you turn on the vehicle.

Select .

The device turns on.

Turning Off the Device Manually

NOTE: When the device is connected to an ignition-switched power outlet, it turns off automatically when you turn off the vehicle.

Select .

The device turns off.

Video Recording

The device immediately begins recording video when it turns on, and it continues recording, overwriting the oldest, non- protected videos until it turns off. While recording, the LED below the screen is solid red.

NOTE: The device records continuously until it turns off.

Protecting a Video Recording

By default, the device uses a sensor to automatically detect accidental collisions and protect the three video files during, before, and after the detection. At 1080p, the video files are approximately four minutes long.

NOTE: You must calibrate the event detection sensor from the settings menu after you install the device in your car (Calibrating the Event Detection Sensor).

You can also manually protect video files at any time. While recording, select .

The device protects the current, previous, and next video files.

NOTE: The device should be installed on the windshield as shown. Installing the device in a sideways or upside-down orientation results in sideways or upside-down video recordings.

5Turn on the vehicle.

When the device is connected to an ignition-switched power outlet, it turns on automatically when you turn on the vehicle.

Taking a Picture

You can take still photographs with this device. While recording, select .

The device takes a photo and saves it to the memory card.

Viewing Videos and Photos

NOTE: The device stops recording video while you view videos or photos.

1Select .

2Select an option:

•Select Video to view videos.

•Select Snapshot to view photos. 3 Select a video or photo to view.

4 Select .

Videos and Photos on Your Computer

You can connect the device to your computer to view, transfer, or delete videos and photos stored on the device memory card (Connecting the Device to Your Computer).

•Videos are stored in the GARMIN\Video folder on the device.

•Photos are stored in the GARMIN\SnapShot folder on the device.

Getting Started

1