Garmin 240 Flush Mounting the Display:, Display Installation (Flush Mount)

Installation

Installing the Display

Pull bracket down until cam lobe contacts

8

Display Installation (Flush Mount)

The Fishfinder 240 can be mounted flush against a dash or electronics rack that is no more than 1/4” thick.

Flush Mounting the Display:

1. Remove the Surface Mount Bracket and Knobs.

2Cut a 4.3”W x 4.35”H relief hole where the unit will be mounted.

3. Place the display in the relief hole and tape in place.

4.Reinstall the knobs in the unit. Install the surface mount with the cam lobes pointed toward the unit.

5.Rotate the surface mounting bracket forcing the cam lobes to pull the unit tight against the surface. Tighten the knobs.