Registering and deleting projectors for monitoring 14
BAfter entering the details, click "Register" to start the
registration. When the message is displayed, click "OK".
To continue registering other projector(s), repeat Steps 1 and 2.
qProjectors that have been registered using automatic search are searched
for again by projector name each time EasyMP Monitor is started.
CTo end the registration operation, click in the top-right
corner of the window or click "Cancel".
The icon(s) of the projector(s) you registered will be displayed in
Grouping view or Detail list view.
Refer to s"Monitoring window layout" p.21 for details on using
the Grouping view and Detail list view.

Setting the range of addresses to do an automatic

search and registration

qProjectors that are using a serial W TCP/IP conversion adapter cannot be
detected.
Procedures for automatic search
Procedure
ARight-click in Grouping view and select "New" - "Projector
(automatic search)".
The Create new projector (automatic registration) window wi ll be
displayed.
If Detail list view is displayed, select New - Projector (automatic
search) from the Edit menu.
BSelect the "Specify an address range and search." check box
and then enter "Start address" and "End address" in the
range.