Using Charts
Using Charts
Other features common to most charts include depth contour lines (with deep water represented in white), intertidal zones, spot soundings (as depicted on the original paper chart), navigational aids and symbols, and obstructions and cable areas.
Navigating to a Point on the Chart1.From the Home screen, select Charts.
2.Select Navigation Chart, Fishing Chart, or Radar Overlay.
3.Select the point on the chart where you want to go.
4.Select Navigate To.
5.Select Go To (or Guide To when using a preprogrammed BlueChart g2 Vision card for Auto Guidance).
6.Follow the colored line on the screen to the destination.
To create a route to a point on the chart, see page 22.
Panning the Navigation ChartUse the ROCKER on your GPSMAP 4000 series unit to move the map pointer (
) away from your current location and to scroll to other areas on the navigation chart. As you pan past the edge of the current map display, the screen scrolls forward to provide continuous map coverage. Touch and drag the Navigation screen on your GPSMAP 5000 series unit to pan away from your current location. The position icon ( ) stays at your present location. If the position icon leaves the map when you pan, a small window appears in the corner so that you can keep track of your current position.
As you move the map pointer, its coordinates, distance, and bearing from your current location appear in the
To pan the map, press up, down, right, or left on the ROCKER (GPSMAP 4000 series), or touch and drag the Navigation screen (GPSMAP 5000 series).
Pointer |
|
|
coordinates |
|
|
Pointer distance |
|
|
and bearing |
|
|
from current |
|
|
location |
| Pan |
Map |
| options |
pointer |
|
|
Position |
|
|
window |
|
|
|
|
|
To stop panning, select Stop Panning.
GPSMAP® 4000/5000 Series Owner’s Manual |