Connecting an S-Video Source

If your video source has an S-Video jack, you can use it to project a higher quality video image. You’ll need an S-Video cable, which is usually provided with your video source, or you can purchase one from EPSON. See page 12.

Before starting, make sure the projector and your DVD player or other video source are turned off.

1.Insert one end of the S-Video cable into the projector’s S-Videoport and the other end into the S-Video output port of your video source.

2.If you want to play sound through the projector, connect the audio plugs on the RCA A/V cable as described on page 22.

3.After you turn on your projector, be sure to:

■If more than one device is connected to the projector, select S-Videowhen you want to project this source. See page 30.

■Open the Audio menu (if you connected the audio cable) and make sure Audio 2 is selected for the Audio Input setting. See page 51.

24Setting Up the Projector