5.Flip the lever back, toward the windshield.

6.Fit the bottom of your nüvi into the cradle.

7.Tilt the nüvi back until it snaps into place.

8.Plug the other end of the vehicle power cable into a power outlet in your vehicle. Your unit should turn on automatically if it is plugged in and your vehicle is running.

Antenna (suction cups not shown)

To power outlet in vehicle

To power connector on nüvi cradle

9.Secure the antenna to the windshield using the suction cups.

Step 5: Configure the nüvi

To turn on your nüvi, slide the Power key to the left. Follow the on-screen instructions.

Step 6: Acquire Satellites

1.Go outdoors to an open area, out of garages, and away from tall buildings.

2.Stop your vehicle, and turn on the nüvi. Acquiring satellite signals can take a few minutes.

The bars indicate GPS satellite strength. When at least one bar is green, the nüvi has acquired satellite signals. Now you can select a destination and navigate to it. For more information about GPS, go to www.garmin.com /aboutGPS.



nüvi 900 Series Quick Start Manual