•If you want to add the shot distance to a club average, select Add to Average, and select the club you used for the shot. The device adds the shot distance to previously saved distances to calculate the average shot distance for the club (page 4).

•If you want to add the shot distance to a club, but not to

the club average, select > Save Shot > , select a player name, and select a club to add a shot to that player's club. The device saves the shot individually, and the shot does not affect the average for the club.

Viewing Club Averages

Before you can view club averages, you must measure your shots and add the shots to your clubs (page 3).

You can also add, remove, and rename your clubs (page 4).

1Select > > Club Averages.

2Scroll through the list to see the average shot length for each of your clubs.

Setting Up Clubs

You can add, remove, or rename your clubs.

1Select Setup > Clubs.

2 Select an option:

•Select Add Club to add a club the existing list.

•Select a club, and select Edit Name to rename the club.

•Select a club, and select Move Up or Move Down to relocate the club in the list.

•Select a club, and select Reset to clear shot data from the club.

•Select a club, and select Delete to remove the club from the list.

Appendix

Device Care

NOTICE

Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause permanent damage.

Never use a hard or sharp object to operate the touch screen, or damage may result.

Avoid chemical cleaners and solvents that can damage plastic components.

Cleaning the Screen

Before you can clean the screen, you should have a soft, clean, lint-free cloth and water, isopropyl alcohol, or eyeglass lens cleaner.

Apply the liquid to the cloth, and gently wipe the screen with the cloth.

Cleaning the Device

1Wipe the device with a cloth dampened with a mild detergent solution.

2Wipe it dry.

Using the Backlight

•At any time, tap the touchscreen to turn on the backlight. NOTE: Alerts and messages also activate the backlight.

•Press to turn on the backlight and adjust the brightness.

•Change the backlight timeout (page 4).

Calibrating the Touchscreen

If the touchscreen does not seem to be responding properly, you can calibrate it.

1Select Setup > Display > Calibrate Screen.

2 Follow the on-screen instructions.

Clearing User Data

NOTE: This deletes all user-entered data.

1Hold to turn off the device.

2Place your finger on the top left corner of the touchscreen.

3While holding your finger on the touchscreen, turn on the device.

4Select Yes.

Settings

You can select Setup to customize device settings and features.

Scoring: Sets the scoring method, sets up handicap scoring page 3, and turns statistics tracking on or off.

Clubs: Adds, removes, and renames clubs (page 4).

Display: Changes the backlight timeout and the background image.

Hole Transitioning: Selects automatic or manual hole transitioning.

Units of Distance: Sets to measure distance in yards or meters.

Language: Sets your language.

Using the Clip

You can use the clip to attach the device to your belt, pocket, or bag.

1Slide the bottom of the Approach into the bottom of the clip.

NOTE: If you place the device into the clip upside-down, it does not lock into place and could fall out of the clip easily.

2Press the top into the top of the clip until it clicks.

3To remove, pull up on the upper clip while pressing on the back of the device to release the top, and slide it out of the lower clips.

Specifications

Battery Type

Lithium-polymer

Battery Life

Up to 15 hours

Operating Temperature

From -4°F to 140°F (from -20°C to

Range

60°C)

4

Appendix