Enabling and Disabling Zones
If you have wired your vessel's speakers into zones, you can enable needed zones and disable unused zones.
1From the media screen, select Menu > Media Menu > Audio Levels > Enable/Disable Zones.
2Select a zone.
Muting the Media Volume
1From the media screen, select 
.
2 If necessary, select Select.
Scanning VHF ChannelsBefore you can scan VHF channels, you must set the source to VHF.
You can monitor VHF channels saved as presets for activity and automatically switch to an active channel.
From the VHF media screen, select Scan.
Adjusting the VHF SquelchNOTE: Your media player must support VHF radio to use this feature.
1From the VHF source page, select Menu > Media Menu > Squelch.
2Use the slider bar to adjust the VHF squelch.
SiriusXM® Satellite RadioWhen you have a Garmin Meteor 300 and SiriusXM Connect Tuner installed and connected to the chartplotter, you may have access to SiriusXM satellite radio, depending on your subscription.
Locating a SiriusXM Radio ID
Before you can activate your SiriusXM subscription, you must have the radio ID of your SiriusXM Connect Tuner.
You can locate the SiriusXM Radio ID on the back of the SiriusXM Connect Tuner, on the back of its packaging, or by tuning your chartplotter to channel 0.
1Select an option:
•Select Media > Source > SiriusXM.
•Select Settings > System > System Information. 2 If necessary, tune to channel 0 or 1.
The SiriusXM radio ID does not include the letters I, O, S, or F.
Activating a SiriusXM Subscription
When the SiriusXM tuner is properly installed and turned on, you can hear a preview channel on SiriusXM channel 0 or 1.
1Contact SiriusXM listener care by phone at (866)
2Provide the necessary information to the SiriusXM representative or on the web site to activate your SiriusXM Connect Tuner.
Subscription Updated appears on the chartplotter display when it is in SiriusXM mode and the tuner has received the activation message.
3If the service is not activated within the hour, go to care.siriusxm.com/refresh or contact SiriusXM by phone at
NOTE: For the SiriusXM Connect Tuner to receive the activation message, it must be powered on and receiving the SiriusXM signal.
Customizing the Channel Guide
SiriusXM radio channels are grouped in categories. You can select the category of channels that appear in the channel guide.
1Select Media > Category.
2 Select a category.
Saving a SiriusXM Channel to the Presets List
You can save your favorite channels to the presets list.
1Select Media.
2Select the channel you want to save as a preset.
3 Select Menu > Presets > Add Current Channel.
Adjusting SiriusXM Satellite Radio Volume
1Select Media > Menu.
2 Select 
or 
.
Unlocking SiriusXM Parental Controls
1From the media screen, select Browse > Parental > Unlock.
2Enter your passcode.
The default passcode is 0000.
Setting Parental Controls on SiriusXM Radio Channels Before you can set parental controls, the parental controls must be unlocked.
The parental control feature allows you to limit access to any SiriusXM channels, including those with mature content. When enabled, the parental control feature requires you to enter a passcode to tune to the locked channels.
Select Browse > Parental > Lock/Unlock.
A list of channels appears. A checkmark indicates a locked channel.
NOTE: When you view the channels after setting parental controls, the display changes:
•
indicates a locked channel.
•
indicates an unlocked channel.
Changing a Parental Passcode on a SiriusXM Radio Before you can change the passcode, the parental controls must be unlocked.
1From the media screen, select Browse > Parental > Change Pin.
2Enter your passcode and select Done.
3 Enter a new passcode.
4 Confirm the new passcode.
Restoring Default Parental Control Settings Values
This process deletes all the settings information you have entered. When you restore the parental control settings to their default values, the passcode value is reset to 0000.
1From the media menu, select Installation > Factory Defaults.
2Select Yes.
Clearing All Locked Channels on a SiriusXM Radio
Before you can clear all locked channels, the parental controls must be unlocked.
1From the media screen, select Browse > Parental > Clear All Locked.
2Enter your passcode.
Setting the Device Name1From the media screen, select Menu > Media Menu > Installation > Set Device Name.
2Enter a device name.
28 | Media Player |