Garmin GSD22 CANet Wiring for the Garmin GSD, CANet Terminator Connection, Multiple CANet Unit Connection

Module Sonar 22 GSD

3

CANet Wiring for the Garmin GSD 22

	CANet			CANet	GSD 22
		See the CANet Terminator			SOUNDER
	Terminator			Terminator
		Connection Diagram Below
					MODULE
		GREEN	CANet	GREEN
		WHITE		WHITE
			Extension Cable
	ORANGE			ORANGE
		BLACK		BLACK
		DRAIN		BLACK
				RED
				FUSE
				3A
3 wire connector
	3 wire connector		BATTERY
			10-35 VOLTS DC
Green		Green	CANet	CANet	CANet
White		White	Unit	Unit	Unit
Green	White

	The CANet Extension Cable can be cut to any length
CANet	1 ft to 80 ft and a CANet compatible device can be	CANet
Terminator	inserted on the cable at any point between the two CANet	Terminator
CANet Terminator	Terminators.

Notes: CANet Terminator Connection Multiple CANet Unit Connection

1.Power and ground wires require 18 AWG. You can extend the CANet wiring of the GSD 22 power/data cable up to 80 ft (24.38 m) total length using the CANet Connections Kit.

2.The CANet Extension Cable can support a maximum of two display units and one sonar unit.

3.The maximum length of cable from the CANet Extension Cable to the sonar or display units is 6 ft.

4.Refer to the chartplotter’s installation instructions for wiring the GPS 17 sensor and other devices.

5.Ground the drain wire on the first display unit. Do not ground the drain wire on the subsequent display units or the sonar unit.

6.The CANet Extension Cable Black wire is reserved for future use. When inserting a CANet unit on the CANet Extension Cable, reconnect all wires according to their color.

NSTRUCTIONSI NSTALLATIONI