Replacing Ink Cartridges 35
11. Close the scanner.
12. Press the yStop button to begin charging the ink. This takes about
2½ minutes. When it’s finished, the POn light stops flashing and remains
on, and the Bink light goes out.
Caution:
Never turn off the NX200 Series while ink is charging or you’ll waste ink. If the
Bink light flashes, press the yStop button and press down all the cartridges
securely.
Note:
If you replaced a cartridge while copying a document or photo, cancel printing and
make sure your original is still placed correctly on the document table. Then copy
your original again.
If you remove a low or expended ink cartridge, you cannot reinstall and use it.