
Starting the monitor
Starting the monitor
To start the monitor:
1 Press the power button on the monitor. The power LED turns on.
Power button
LED
2
3 After your computer is running, the power LED on the monitor should be green. Allow about 10 seconds for the display image to appear. If the power LED is not green or you do not see a display image, check the connections. For more troubleshooting information, see “Troubleshooting” on page 17.
4
5 After you see the Windows desktop, press the RESET/AUTO button to automatically adjust the display image to the ideal settings.
6 Use the
Important When adjusting the monitor settings, always press the RESET/AUTO button before entering the OSD. This will automatically adjust the display image to the ideal settings for the current screen resolution.
www.gateway.com | 5 |