Gateway 860 1 2, 3 4 5 6, 7 8 9 10 11

45
Main menu
www.gateway.com
Manual
This function gives you the option to manually enter the IP, net mask and
gateway IP address of the LAN2 host.
To configure LAN2 manually:
1Press the Enter button.
2Press the Next or Previous button to select Network on the Main menu, then
press the Enter button.
3Select LAN 2, then press the Enter button.
4Select Manual, then press the Enter button.
5Select IPAddr2, then press the Enter button.
6Enter the IP address by pressing the Enter button to increase number input.
Press the Next button to move the cursor to input the remaining numerical
value of the IP address, then press the Exit button.
(Example) 192.163.001.010
7Select NetMask2, then press the Enter button.
8Enter the subnet mask, then press the Exit button to end input.
9Select GWIP2, then press the Enter button.
10 Enter the gateway IP address, then press the Exit button to end input.
11 Select OK, then press the Enter button. The “Wait host respond” message
appears on the LCD screen. After a few seconds, the “Setting OK” message
appears.