SETTING UP YOUR GATEWAY MONITOR
1 Connect your monitor to your computer | 2 Plug in the monitor | 3 Turn on the monitor | |
Follow the instructions that came with your computer. | To protect your monitor from power fluctuations, |
| |
|
| use a surge protector. |
|
AnalogVGA | Digital DVI |
|
|
(supplied) | (optional*) |
|
|
GettingHelp
See your documentation
Refer to the documentation that came with your monitor or go to gateway.com to get the online documentation.
Check Gateway Support
For
ConnectingYour Flat Panel LCD Speaker Bar*
1Tilt the screen back, center the speaker bar below the screen, then tighten the thumb screws.
2Connect the USB power cord to a USB port on your computer.
3Connect the speaker bar’s headphone and microphone cables to your computer, then turn on the speaker.
MAN FPD2085/2185 POSTER R2 12/05
* Available at www.gateway.com © 2005 Gateway, Inc. All rights reserved. Gateway is a trademark or registered trademark of Gateway, Inc. in the U.S. and other countries. Product specifications subject to change without notice. Actual product may vary from image shown.