Important Safety Instructions
Observe the following safety instructions when using your system:•Follow all instructions marked on this product and in the documentation.•When the system is turned off, a small amount of electrical current still runs through the system. Always unplug the system from the electrical outlet before cleaning the system or opening the cover.
•Do not use this product near water or a heat source, such as a radiator or heat register.
•Do not spill anything on or into the system. The best way to avoid spills is to avoid eating and drinking near your system.
•Make sure you set up the system on a stable work surface.•Openings in the system cabinet are provided for ventilation. Do not block or cover these openings. Make sure you provide adequate space (at least 12 inches) around the system for ventilation when you set up your work area. Never insert objects of any kind into the system ventilation slots.
•Use the voltage setting for your area. The voltage selector switch is set at the factory to the correct voltage.
•This system is equipped with a
•If you use an extension cord with this system, make sure the total ampere ratings on the products plugged into the extension cord do not exceed the extension cord ampere rating. Also, the total ampere requirements for all products plugged into the wall outlet must not exceed 15 amperes.
Warning!
Do not attempt to service the system yourself except as explained elsewhere in the system documentation. Adjust only those controls covered in the instructions.
Opening or removing covers marked “Do Not Remove” may expose you to dangerous voltages or other risks.
Refer all servicing of those compartments to qualified service personnel.
Preface 3