105
www.gateway.com
3Click Add. The network properties dialog box opens.
4Type the name of the network in the Network name (SSID) box.
5Click the arrow button to op e n the Network Authentication list, then click the network
authentication option you want.
6If this is a security-enabled network, click the arrow button to open the Data encryption
list, then click WEP.
7If the WEP network key is not provided automatically, click to clear The key is provided
for me automatically check box, then type the network key settings in the Network key
and Confirm network key boxes to match those set on the access point.
- OR -
If the WEP network key is provided automatically, then leave the check mark selected
in The key is provided for me automatic ally check box.
8Make sure that the This is a computer-to-computer (ad hoc) network; wireless access points
are not used check box is not selected.
9Click OK to close the Wireless Network Properties dialog box. Your network should be
running. Go to “Testing your network” on page109.