6www.gateway.com
Starting the monitor
To start the monitor:
1Press the power button on the front of monitor. The power LED turns on.
2Turn on your computer.
3After your computer is running, the power LED on the monitor should be green. Allow
about 10 seconds for the display image to appear. If the power LED is not green or
you do not see a display image, check the connections. For more troubleshooting
information, see “Troubleshooting” on page15.
4Adjust the tilt of the monitor for the best viewing angle.
5After you see the Windows desktop, press the AUTO/SELECT button to automatically
adjust your display image to the ideal settings.
6Use the on-screen display (OSD) to adjust other monitor settings. For more
information, see “Adjusting monitor settings” on page7.
Important When adjusting the monitor settings, always press the
AUTO/SELECT button before entering the OSD. This will
automatically adjust the display image to the ideal settings for the
current screen resolution.
The best screen resolution is 1280× 1024.
Power
button