Using Your Gateway Flat Panel Monitor

4 Make sure that your computer is turned off, then connect the other end of the video cable to the matching video port on the back of your computer.

5 Connect video inputs (such as from a DVD player, video camera, or receiver) to the appropriate video jacks on the back of the monitor.

Component red Pr jack

S-Video jack Component blue Pb jack

Composite video in jack Component green Y jack

■For basic video quality, connect your video device’s composite video in jack to the corresponding jack on the back of your monitor. (cable not included)

■For better video quality, connect your video device’s S-Videojack to the corresponding jack on the back of your monitor. (cable not included)

■For best video quality, connect your video device’s component video (green Y, blue Pb, and red Pr) jacks to the corresponding jacks on the back of your monitor. (cables not included)

6 Plug the power cord into a correctly grounded electrical outlet.

4

www.gateway.com