www.gateway.com
Setting up the optional stand
Attaching the USB stand
In the United States, you can buy an adjustable USB stand from www.gateway.com. The stand can be adjusted for height, tilt, and screen rotation. With EzTune software installed on your computer, a sensor inside your monitor detects the rotation mode (portrait or landscape) your monitor is in, and rotates the screen image accordingly.
When the stand is connected to your computer’s USB port, you can connect up to four USB devices to the USB 2.0 ports on the stand. Including the ports on your monitor, you could have a total of eight
To attach the adjustable stand:
1Make sure that the monitor is turned off.
2Place the monitor
3Remove the two screws from the neck hinge, then remove the neck from the LCD panel. Do not discard the screws.
Screw
4Place the hinge cover over the hinge, then attach the hinge cover using the screws you removed from the original neck hinge. The hinge cover came with your monitor.
5Remove the four small screws from the back of the LCD panel. Do not discard the four screws.
Screw | Screw |
Screw | Screw |
7