Gateway FPD 1540 11

Starting the monitor

3 After your computer is running, the power LED on the monitor should be green.

Power LED

Allow about 10 seconds for the display image to appear. If the power LED is not green or you do not see a display image, check the connections. For more troubleshooting information, see “Troubleshooting” on page 21.

4 Adjust the tilt of the monitor for the best viewing angle.

5 Use the on-screen display (OSD) to adjust other monitor settings. For more information, see “Adjusting monitor settings” on page 8.

www.gateway.com

Contents

Page Page Contents Page Page Connecting the monitor To connect the monitor: Page Page Page Starting the monitor To start the monitor: Page Adjusting monitor settings External controls Monitor buttons OSD controls To adjust the OSD settings: OSD menus Page Page Page Software controls Adjusting the color depth To change the color depth: Page Adjusting the screen resolution To change the screen resolution: Page Video modes Power management ENERGY STAR Energy declaration Maintenance Troubleshooting No power No picture Power button does not turn on the monitor Image “ghosts” Display colors are wrong Picture has shadows Color is not uniform Image is not sized or centered correctly The monitor has pixels that are always dark or too bright Specifications Environmental specifications Important safety information Setting up your system Care during use Replacement parts and accessories Regulatory compliance statements United States of America Canada EPA ENERGY STAR California Proposition 65 Warning Notices