Gateway GR380 F1 Technical specifications PCIe specifications, Onboard storage specifications

GR380 F1 specifications

Technical specifications

PCIe® specifications

The primary I/O bus for the main board is PCIe Gen2. The following table lists the characteristics of the PCI-E bus segments. Details about each bus segment follow the table.

NOTE: The signaling bit rate of PCI Express is 2.5Gbit/s one direction per lane for Gen 1 and 5.0Gbit/s one direction per lane for Gen 2.

Expansion	Number	Type	Bus	Voltage	Connector	Location	Length
slot			width1
PCIe x16	1	PCIe	x8	3.3V	x16	Riser, left	Full height
		Gen2
PCIe x8	2	PCIe	x4	3.3V	x8	Riser, left	Full height
		Gen2
PCIe x8	3	PCIe	x4	3.3V	x8	Riser,	low-profile
		Gen2				right
Flex I/O	1	PCIe	x8	3.3V	x8	Riser, left	Full height
		Gen2

NOTE:

1.Indicates the number of physical electrical lanes running to a PCIe® connector.

2.Default bus assignment (in decimal). Inserting cards with PCI™ bridges may alter the actual bus assignment number.

3.Slots are enumerated differently based on the operating system. Microsoft® operating systems enumerate Device ID by bus starting from the lowest bus to the highest.

Onboard storage specifications

Item

Controller

Simultaneous drive transfer channels Max throughput per channel

Data transfer method

Drive type supported

RAID levels support

RAID function support

RAID OS support

Description

Intel® 82801JR (ICH10R) I/O Controller Hub

6 onboard SATA ports

3Gb/s

•Non-RAID mode

•RAID mode Serial ATA

•RAID 0, 1, 10, 5 (Intel software RAID)

•RAID 0, 1, 10 (Adaptec software RAID)

NOTE: Intel software RAID only supports Windows OS

￿Supports multiple logical volumes

￿Setup through ROM based Array Configuration Utility Installation scripting support

NOTE: This controller does not support LED functions

•Windows Server 2008

6