27
Step 2: Configuring the PCCard
www.gateway.com
6Type a name for your workgroup in the Workgroup box.
Use a workgroup name of up to 15 cha racters with no
blank spaces. The workgroup name must be the same
for all computers in your network workgroup, and the
name must be different than any computer name on
your network.
7Click OK to close the Identification Changes dialog box.
8Click OK to close the System Identification dialog box.
9After you name each computer and assign it to your
workgroup, go to “Step 3: Configuring the TCP/IP
protocol” on page 28.
8509391.book Page 27 Tuesday, August 12, 2003 12:52 PM