Connecting to the port replicator

Important The notebook may detect additional devices and add drivers after being attached to the port replicator. This process must be completed for components to work correctly. Follow any on-screen instructions, if necessary.

Important The port replicator’s power button controls both the notebook and the port replicator only after the port replicator is connected to AC power.

Important The notebook’s monitor port is disabled when the port replicator is connected to the notebook. If you want to use an external monitor, plug it into the monitor port on the port replicator.

Important The notebook’s Ethernet jack is disabled when the port replicator is connected to the notebook. If you want to connect to a cable or DSL modem or to an Ethernet network, plug the Ethernet cable into the Ethernet jack on the port replicator.

Important If you are using a USB or parallel port printer connected to the port replicator, you must select Virtual printer port for USB during the Windows printer installation. Windows will not be able to detect your printer if you make a different selection.

Important This port replicator does not support Fast IR.

www.gateway.com

7