Turn the convertible tablet PC over so the top is facing up.

Replacing Gateway M275 Components

Replacing memory under the keyboard

Tools you need to complete this task:

Flat-blade driver

- OR -

Scribe or non-marring tool

Phillips #0 screwdriver

Screws removed during this task:

2 chrome 2.5 × 6 mm (keyboard - bottom)

4 chrome 2.5 × 2.5 mm (keyboard - top)

Important Use only memory modules designed for the Gateway M275.

To replace memory modules:

1

2 Remove the two keyboard screws marked with a K. For more information, see Step 2 on page 21.

3

4 Remove the keyboard cover by following the instructions in “Replacing the keyboard cover” on page 18.

5 Open the keyboard compartment by following the instructions in “Replacing the keyboard” on page 20.

Tips & Tricks You do not need to disconnect the keyboard from the system board.

28

www.gateway.com