Replacing the system board

24 Remove the system board. Make sure that the rear I/O panel clears the bottom of the chassis (shown by the top arrow) and the side audio jacks clear the bottom of the chassis (shown by the left arrow).

25

26

27

28

Place the new system board into the convertible tablet PC.

Replace the three system board screws in the holes on the top of the system board.

Replace the two rear I/O panel hex nuts and the two rear docking station hex nuts.

Reassemble the convertible tablet PC.

© 2004 Gateway, Inc. All rights reserved. Gateway, Gateway Country, the Gateway stylized logo, and the black-and-white spot design are trademarks or registered trademarks of Gateway, Inc. in the United States and other countries. All other brands and product names are trademarks or registered trademarks of their respective companies.

www.gateway.com

89