![](/images/backgrounds/131453/131453-6639x1.png)
www.gateway.com
Important
Use only memory modules designed for your Gateway notebook.
Replacing the DVD drive
9Hold the new or replacement module at a
10Gently push the module down until it clicks in place.
11Replace the memory bay cover, then tighten the captive screws.
12Replace the removable and keyboard screws.
13Insert the battery, then turn your notebook over.
14Connect the power adapter, modem cable, and network cable, then turn on your notebook.
Replacing the DVD drive
Important
Replace the DVD drive only with a similar drive provided by Gateway.
Tools Required
You need a small Phillips screwdriver to replace the DVD drive.
If your DVD drive becomes damaged, you can replace it with a similar drive obtained from Gateway.
To replace the DVD drive:
1Make sure that the DVD drive is empty.
2Follow the guidelines under “Preventing static electricity discharge” on page 32.
3Turn off your notebook.
4Disconnect the AC adapter, modem cable, and network cable.
5Disconnect all peripheral devices and remove any PC Cards.
6Turn your notebook over so the bottom is facing up, then remove the battery. For more information, see “Changing batteries” on page 27.
35