20201-GBC5117 2240s-2260x EU20 05/12/29 2:06 PM Page 4
ShredMaster® 2240S/2260X
Specifications
Models | 2240S | 2260X |
Cutting Style | Straight cut | Cross Cut |
Throat Width | 235mm | 235mm |
Shred Width | 4 mm | 4 x 35mm |
Sheet Capacity* | 14 | 10 |
Speed | 4.6 mpm | 4 mpm |
Amperage | 1,7 Amps | 1,7 Amps |
Noise Level | 68 dB | 68 dB |
Duty Cycle | Continuous run | Continuous run |
CD Duty Cycle | – | 20 CDs /15 min off |
|
|
|
Volts/ Hz | ||
Bin Capacity | 55 | 55 |
Staples/ PaperClips | Yes | Yes |
|
|
|
Credit Cards | Yes | Yes |
* Meassured using standard 80gm/m2 paper. Shredding other than standard paper may damage or shorten the lifetime of the shredder knives.
Important safety instructions
YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS IMPORTANT TO GBC. IN THIS INSTRUCTION MANUAL AND ON THE PRODUCT ARE IMPORTANT SAFETY MESSAGES. READ THESE MESSAGES CAREFULLY.
THE SAFETY ALERT SYMBOL PRECEDES EACH SAFETY MESSAGE IN THIS INSTRUCTION MANUAL AND ON THE PRODUCT. THIS SYMBOL INDICATES A POTENTIAL PERSONAL SAFETY HAZARD THAT COULD HURT YOU OR OTHERS, AS WELL AS CAUSE PRODUCT OR PROPERTY DAMAGE. DO NOT CONNECT HIS UNIT TO ELECTRICAL POWER OR ATTEMPT TO OPERATE IT BEFORE YOU HAVE READ THESE OPERATING INSTRUCTIONS. SAVE THESE INSTRUCTIONS FOR LATER USE.
THIS WARNING IS FOUND ON THE PRODUCT.
ATTENTION
Electrical shock hazard. Do not open. No user servicable parts inside. Refer servicing to qualified service personnel.
This safety message means that you could be seriously hurt or killed if you open the Product and expose yourself to hazardous voltage.
THIS WARNING IS FOUND ON THE
WARNING
Sharp blades above. Keep hands away from discharge chute. Do not attempt to defeat safety interlock switch.
This safety message means that you could be seriously hurt if you place your hands in the discharge area.
Control Panel
REVERSE/AUTO ON OFF/FORWARD
Waste Bin
CD Throat (2260X)
Electrical safeguards
•Unplug your shredder before moving it, emptying the shred bag, or when it is not in use for an extended period of time.
•Do not operate with a damaged power supply cord or plug, after it malfunctions, or after it has been damaged in any manner.
•Do not overload electrical outlets beyond capacity as this can result in fire or electrical shock.
•The
•Do not alter the attachment plug. The plug is configured for the appropriate electrical supply.
•Do not use near water.
•Keep out of reach of children.
•Do NOT use aerosol dusters or cleaners.
•Do NOT spray anything into the shredder.
WARNING
Do NOT use aerosol dusters or cleaners
Do NOT spray anything into the shredder
Foreign substances can be explosive
4
