Specifications
| GBC W18 Wire Binder | GBC W20 Wire Binder | GBC W25E Wire Binder |
| |||
Operation mode | manual | manual | electric |
Max. binding size | A4 | A4 | A4 |
|
|
|
|
Hole pitch | International pitch 3.1” | International pitch 3.1” | International pitch 3.1” |
| (8.46mm) | (8.46mm) | (8.46mm) |
Number of punch slots | 34 | 34 | 34 |
Margin depth | fixed | fixed | fixed |
Punching paper (80gsm) | max. 15 | max. 20 | max. 25 |
|
|
|
|
Punching PVC plastic | max. 2 | max. 2 | max. 2 |
foils (0.2mm) |
|
|
|
Max. wire diameter | 14mm | 14mm | 14mm |
Binding capacity | 125 sheets | 125 sheets | 125 sheets |
Net weight | 11kg | 13.14kg | 18.1kg |
|
|
|
|
Dimensions WxDxH | 470x450x200mm | 495x450x200mm | 495x450x170mm |
Voltage | n/a | n/a | 230V 50Hz AC |
Location of controls
1Document separator
2Clippings tray (located at side of machine)
3 Wire closing handle
4 Paper centering dial
5 Wire binding channel
6 Quick start guide (W20, W25E only)
7 Electric punch button (W25E only)
8 Wire selector (W20, W25E only)
9 On/Off switch (W25E only) J Punching slot
K Punching handle (W18, W20 only)
W25E is approved to EN60950 and CE Standards. Technical data subject to change without notification.
Safety instructions | m |
YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS IMPORTANT TO ACCO BRANDS EUROPE. IN THIS INSTRUCTION MANUAL AND ON THE PRODUCT ARE IMPORTANT SAFETY MESSAGES. READ THESE MESSAGES CAREFULLY.
•In order to avoid overloading your machine, please refer to the maximum punch guide located on the front of your machine before punching.
•When punching PVC/PP covers, we recommend the cover be punched with some paper either side.
•DO NOT punch metallic objects such as staples or paper clips.
•Please empty the waste tray regularly.
•Ensure that the machine is operated on a flat stable surface.
•Never lift the machine by the punching handle. Always use the hand grips located on the side of the machine.
•To avoid risk of injury DO NOT put your fingers into the wire binding channel.
•The binder is not to be exposed to temperature / humidity conditions that would cause condensation. Maximum ambient temperature ~40ºC.
Safety tips - W25E | m |
•DO NOT obstruct air inlets and outlets.
•DO NOT use the binder if the power cord (mains cable) is damaged.
•DO NOT place the power cord where it may be tripped over or pulled.
Ensure it does not come into contact with hot surfaces such as pipes or radiators. Make sure the cable is not squashed or pinched.
•DO NOT use an extension cable unless it is absolutely necessary and then only use one of a suitable current rating (10A or greater).
•DO NOT leave the binder connected to the electricity supply when not in use.
•DO NOT immerse the binder in water or other liquids. Doing so will result in ELECTRIC SHOCK.
•DO NOT attempt to disassemble the binder. Always consult a qualified person.
•The noise emitted by the machine does not exceed 70 dB.
Special notice
Thank you for choosing a GBC Binding Machine. We aim to produce quality binding machines at an affordable price, with many advanced features to enable you to create excellent results every time. Before using your machine for the first time, please take a few minutes to read through this guide and retain these instructions for future reference.
Setting up
•Your machine is ready to use when removed from the box. Retain the packaging in case you need to return the machine for repair.
•The punching mechanism is coated with a protective film of lubricant, which will mark your paper. Clear this by punching scrap sheets of paper until clean prior to binding.
Setting up - W25E
• Connect the binder to the electricity supply with the power cord supplied.
• Switch ON using the ON/OFF switch located at the rear of the binder by the power inlet socket.
• Wait while the binder goes through an automatic check procedure, both LED’s light up.
• When complete the green LED will remain ON.
• For foot pedal operation of the punching cycle, connect the foot pedal cable to the socket at the front of the machine.
• The binder is ready for operation.
mWARNING: This appliance MUST be earthed. If in doubt consult a qualified electrician.
Maintenance options
•If you would like to extend your warranty coverage beyond the stated manufacturers period, please consult your local ACCO Brands Europe reseller for options.
4
