GE 0150-0193C 2.8 Sequencing

0150-0193C 22 Calibur DVMRe Triplex

Display any camera in the active cameo by pressing the Number button of

the desired camera. Once a camera has been selected, the active cameo

advances to the next cameo on the right. Number Button

The camera selection only changes the multiscreen currently being displayed. Each multiscreen must

be configured separately. Changes to the multiscreen display are saved in non-volatile memory, and

will be retained even if power is removed from the unit.

Press the Freeze button to freeze the image in the selected cameo. Each

frozen cameo is indicated as * (a flashing asterisk) on-screen.

Press the Freeze button again to cancel Freeze operations. Freeze Button

2.8 Sequencing

The sequencing feature allows a camera to be displayed briefly on-screen,

before advancing to the next camera in the sequence list. The default

sequence list displays each camera in numerical order.

Sequence Button

The dwell time is the amount of time each camera is displayed on-screen before advancing to the next

camera. The Full Screen and Multiscreen Dwell Times are separately programmable in the menu

system. For detailed information about configuring the dwell times in the menu system, see section

3.9.

The Autolist™ feature allows the user to create a custom sequence list, controlling the order the

cameras are displayed and the dwell time. Separate Autolists may be created for Monitor A (Live and

Playback mode) and Monitor B (Live mode). Using the Monitor button, select the monitor to be

programmed. Then, using a Number button, select any camera for full screen display.

The unit must be in Full Screen Display mode before starting to create the sequence list.

This initial camera is not part the sequence list.

To begin recording the Autolist™ sequence: Press the Alarm button and

Sequence button simultaneously. Autolist Program mode is indicated as

PGM on-screen.

Recording starts when the first camera number is pressed. Press the camera

numbers in the order you wish them to appear on-screen. The amount of

time between button presses determines the Dwell Time. During sequence

list programming, pressing any button other than a Number button or the

Sequence button voids the sequence list.

Alarm Button and

Sequence Button

To end the recording: Press the Sequence button. The amount of time between pressing the last

Number button and the Sequence button determines the dwell time for the final camera in the

sequence list.

The default sequence list is all cameras in numeric order with a three second dwell time.

NOTE