0150-0193C 45 Calibur DVMRe Triplex
q Main Menu → Motion Detection → Enable/Disable Detection
Selecting Enable All or Disable All from this menu will activate or deactivate
motion detection on all cameras.
Selecting Individual Enable from this menu will bring up the following menu.
Individual Enable Menu
Use this menu to enable or disable motion detection on a per
camera basis. Rotate the Jog to navigate, and the Shuttle
to change the values.
q Main Menu → Motion Detection → Setup Parameters
Use this menu to select the Camera, Motion Detection Type, and Sensitivity of the Motion Detection
you wish to configure.
Motion Detection Parameters Setup
[CANCEL] [OK]
Camera
Motion Detection Type
Sensitivity
Relay Output
Link to Event
Rejection
Target Size
Link to Alarm
01
ACTIVITY
06
2
---
LOW
01
NONE
Navigate in this menu using the Jog to select the field and the Shuttle to change the parameters.
Activity Vs. Intrusion
Activity Detection is a simple type of motion detection having only a sensitivity setting and a relay
output. Intrusion Detection is a more sophisticated type of motion detection, with additional features
such as false alarm rejection levels, minimum target size, and an alarm output.
Enable All
Disable All
Individual Enable
Detection Enable
[CANCEL] [OK]
Camera 01:
Camera 02: Disable
Camera 03: Enable
:
:
Camera 16: Enable
Enable