TRANSFER FRESH FOOD DOOR
HANDLE TO THE RIGHT (CONT.)
After removing the handle: Remove the plug buttons
from the right edge of the door top and insert them
into the handle screw holes on the left side.
Remove the plug button from the left edge of the
door and insert it into the hole on the opposite side.
Transfer the button on the door to the opposite side.
Install the handle on the other side of the door.
5
TRANSFER FRESH FOOD DOOR
HANDLE TO THE RIGHT
For models without a handle, continue to Step 6.
To remove the handle:Remove the plug button by
carefully prying under the edge with a putty knife.
Remove the exposed screw holding the handle.
Remove the two screws holding the handle to the
top of the door.
5
Plug
button
Handle bottom Handle top
Screws for
handle holes
Plug button
Installation Instructions
TRANSFER BOTTOM HINGE
TO THE LEFT
To access the bottom hinge, move the refrigerator
so it is 30″from a wall. Then carefully tip the
refrigerator back until it rests against the wall.
CAUTION: Be sure that the coils
on the back of the refrigerator do not rest against
the wall. Doing so could damage the coils.
Remove the screws (some models have washers with
each screw), leveling leg and bottom hinge from the
right side. Remove the leveling leg from the left side
of the cabinet and install it in the right side.
Reassemble the bottom hinge on the left side.
NOTE: The leveling legs are not interchangeable.
4
11
Plug button
30″