Preparing for Vacation

For long vacations or absences, remove
food and unplug the refrigerator. Move
the control to the OFF position, and clean
the interior with a baking soda solution
of one tablespoon (15 ml) of baking soda
to one quart (1 liter) of water. Leave the
doors open.

Preparing to Move

Secure all loose items such as shelves and
drawers by taping them securely in place
to prevent damage.
Be sure the refrigerator stays in an upright position
during moving.
Consumer SupportTroubleshooting TipsOperating InstructionsSafety Instructions Installation Instructions
7
ge.com

Replacing the Light Bulb

Moving the control to OFF does not remove power
to the light circuit.
The bulb is located behind the shield next
to the control.
Unplug the refrigerator.
Remove the screw.
Push in near the top of the shield
and rotate down and out.
Replace the bulb with an appliance
bulb of the same or lower wattage
(40 Watt maximum).
Insert the tabs at the bottom of the
light shield with the slots in the bulb
housing.
Rotate the shield up until the tabs at
the top of the shield pop into place
in the bulb housing.
Replace the screw.