GE 169120 Resetting Your Deep Fryer, How To Clean Your Deep Fryer, Frying Time And Temperature

Models: 681131690904 169120 169090

1 6
Download 6 pages 8.93 Kb
Page 4
Image 4
RESETTING YOUR DEEP FRYER

16909006.qxd 6/2/06 17:53 Page 7

RESETTING YOUR DEEP FRYER

This Fryer is equipped with a sensor which will automatically shut the unit off if it is overheated. Overheating can occur if the unit is heated without oil, with insufficient oil, or with older oil that has become thick. Should the unit shut off, unplug and allow the unit to cool. Correct the cause of overheating. Then with the tip of a pen or pencil or the end of a paper clip, press into the recessed Reset Button on the back of the Control Panel Assembly (Refer to Parts and Features section of this manual). The unit will not operate until it is reset .

HOW TO CLEAN YOUR DEEP FRYER

WARNING: Always flip ON/OFF Toggle Switch to “OFF” then disconnect plug

from wall outlet BEFORE disconnecting BREAK-AWAY CORD.

CAUTION:

Do not immerse cord sets in water or any liquids.

Do not attempt to defeat the detachable magnetic Break-away cord system by trying to permanently attach cord set to product .

Do not stick pins or other sharp objects in holes on magnetic cord set .

Do not use any type of steel wool to clean magnetic contacts.

1.Unplug from outlet and allow unit to cool completely.

2.Remove Break-away magnetic cord from the fryer.

3.Clean the outside of the Deep Fryer and lid with a damp cloth.

CAUTION: Do not use abrasive pads or alcohol.

4.Remove Frying Basket . Wash the Frying Basket in the dishwasher or with hot soapy water. Rinse and towel dry carefully.

5.Lift Control Panel Assembly up from the front of fryer. Gently wipe down the outer surface of the Control Panel Assembly with a damp cloth containing mild soap solution or plain water.

6.Remove Condensation Tray.

NOTE: A Removable Condensation Tray is located on the back of the fryer. The Condensation Tray will collect any water that has condensed on the inside of the Lid when the Lid is opened after frying. Remember to empty and clean the Condensation Tray after each use. To clean, simply rinse with warm water. NOTE: the Control Panel Assembly should never be immersed in water or other liquids.

CAUTION: Be sure you have allowed enough time, after using, for Control Panel Assembly to cool down completely.

Carefully lift Oil Reservoir out by holding the rim of the bowl. See Tips for Oil Use and Storage on page 8.

7.The Basket, Lid and Oil Reservoir are dishwasher safe. For best results, remove Grease Filter from Lid and wash separately in warm soapy water or in the dishwasher. Dry thoroughly. Dry all parts thoroughly after cleaning.

8.Ensure that both the Lid and the Oil Reservoir are completely dry after washing and before use.

9.After cleaning, reassemble Control Panel Assembly into the locating slots on the Fryer Housing (See Fig. 1). The Control Panel Assembly must be attached properly to the Fryer Housing or the appliance will not operate.

FRYING TIME AND TEMPERATURE

The frying times in this chart are a guide and should be adjusted to suit the different quantities or thickness of food and to suit your own taste.

FOOD

TEMP. SETTING

TIME (MINUTES)

Chicken Strips

375 °F

5 to 8

 

 

 

Chicken pieces, bone-in

360 °F

15 to 20

 

 

 

Fish, Battered, fresh

320 °F

8 to 10

French fries, frozen

375 °F

3 to 5

Fritters

375 °F

2 to 4

 

 

 

Onion Rings

375 °F

3 to 5

 

 

 

Shrimp, breaded

375 °F

2 to 4

 

 

 

E6

E7

Page 4
Image 4
GE 169120, 681131690904 warranty Resetting Your Deep Fryer, How To Clean Your Deep Fryer, Frying Time And Temperature