INSTALLATION —DESK OR TABLE TOP
fillow these steps to connect your new ~A. Introduction
telephone for proper operation. Make sure you .
have amodular telephone jack. Amodular 9
(Universal Service Order Code) USOC: RJ1lC :
outlet (illustrated) jack is required. ●
●
Installation of this telephone in locations Wth :/“
..
~prong jacks or with hard-wired outlets will ●
/-’
/
require additional Converters (not included). The :
dealer from whom you purchased your phone or :\
,,“
atelephone supply store can advise you ●/’
regarding the proper Converter. ●
●,/”
●,,,
●
●
1. Connect the Coiled Cod ~B. Installation for Desk or
Plug one end of the COILED CORD to the .Table Top Use
HANDSET and plug the other into the ●
HANDSET
HANDSET
●
2. Connect the Telephone Line Cod ●
Plug the PHONE LINE CORD into the jack :
on the bottom of the ~SE UNIT. Then, plug :
the PHONE LINE CORD into the telephone .
outlet. An RJ1lC outlet jack illustrated) is :
required. If you don’t have an RJ1lC, an ●
adapter can be purchased “from any .
telephone store.
-
6